 |
|
|
| |
Following are the features of the software:
- Material, Mold and Machine Databases
- Mold – Machine Compatibility Report based on tonnage, residence times, % shot weight usage.
- Scientific Molding Worksheets
- Viscosity Curves to optimize injection speed
- Pressure Drop Study to determine if the process is pressure limited
- Cavity Balance Determination to verify cavity balance
- Process Window study to optimize holding pressures
- Gate Seal Study to optimize holding times
- Cooling time study to optimize cooling times
- Mold Trial Check list for each trial and iteration
- Mold Trial report with ability to import pictures and videos
- Automatically generated Mold Qualification Progress Report
- Water Line Diagram documentation
- Mold Temperature Maps documentation
- Mold Setup Documentation with ability to import pictures and videos
- Operator Instructions with ability to import pictures and videos
- Quality Module
- Full Dimensional Analysis for every trial and iteration
- Statistical Analysis of cavities and dimensions of choice for every trial and iteration
- Window Study Dimensional Report for every trial and iteration
- Post Molding Shrinkage Report
- Quality Inspection Plan with the ability to import pictures and videos
- Mold Design Checklist, customized and editable
- Part Design Checklist, customized and editable
- Mold Inspection Checklist, customized and editable
- Calculation worksheets and conversions commonly used in molding
- All information can be saved on the server for network use
|
|
|
|
